Component Names And Functions - JVC GV-LS1 Mode D'emploi

Component Names and Functions

● Camera
1
!
@
#
$
1 Internal mic: Transmits/Records
sounds coming through this mic when
no external mic is connected.
2 Lens: Do not touch it directly.
3 LED light: Works as a light in dark
places.
4 Information lamp: Can be lit up to
indicate the recording status, etc.
5 Camera sensor: Adjusts the white
balance automatically.
6 [RESET] button: Resets the network
settings. Press and hold this button
with the tip of a paper clip or the like
when the AC adapter is connected.
7 LAN terminal: Connects to a
computer or router via a LAN cable.
8 Network mode switch: Switches the
network mode.
9 Battery terminal: Connect a
separately purchased battery pack.
(BN-VG139U)
For more details, refer to the "Detailed
8
For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/
<Front>
3
4
5
2
<Top>
<Back>
6
RESET
7
DIRECT WLAN LAN(OFF)
ETHERNET
8
<Bottom>
%
User Guide."
0 SD card slot: For compatible cards,
see p.7.
- [MIC] terminal: Connect an external
mic.
= [DC] connector: Connect the
supplied AC adapter.
~ [AV] connector: Connect a separately
purchased AV cord.
! Shoe adapter mount: Mount camera
accessories or the like.
@ Shooting button: Starts recording. To
stop, press this button again.
# [WPS] button: Press and hold to
connect wirelessly (Wi-Fi) in WPS
mode for the fi rst time.
$ [POWER] button: Press and hold to
power on. To power off, press and hold
this button again.
% Tripod mounting hole: Mount a
separately purchased tripod.
9
-
MIC
DC
=
AV
~
0