Badabulle B014404 Notice D'utilisation page 9

START
1 2
WARNING: check the security settings in your
smartphone, unknown sources should be accepted.
START WI-FI
1- Download the "See my Baby" application on the App Store
or on Google Play.
2- Connect the camera to the mains with the mains power
adapter (B).
3- Set the button located on the rear of the camera (6) to
"pairing". A red light (8) appears, and then a green light
replaces it after a few seconds. This means that your
camera is ready to be associated with your Smartphone.
4- Take your Smartphone and go to "settings" and then
"Wi-Fi". Select the Wi-Fi network emitted by the
"Badabulle-Cam" camera.
5- Enter the default password "12345678".
6- Once the Wi-Fi network is connected, start the application
previously downloaded on your Smartphone; the camera
is automatically started.
All manuals and user guides at all-guides.com
START 3G
3
1- Go to , put the password "12345678".
2- Go to "Join Home AP".
3- Select your Wi-Fi network as the router.
4- Enter your Wi-Fi password or the WEP key.
5- Press "Join".
6- The message"The pairing of join WIFI AP is done; please
switch your camera to Station mode and re-power it."
appears.
7- Press "OK".
8- Set the button located on the rear of the camera to "link";
a red light appears. Then restart the camera by pressing
the switch once (9). The LED indicator turns green when
your camera is connected to your WIFI network.
9- Exit and then return to the "See my Baby" application;
your camera is connected in the 3G mode.
You can now connect your camera wherever you are.
We highly recommend changing your password to secure
access to your camera. (Cf. Changing the password).
PLEASE NOTE: the video automatically disconnects
after five minutes to avoid unnecessarily draining your
smartphone battery. A notification message informs you
that the application has entered standby mode: "The video
session would be ended now".
9