Ec Declaration Of Conformity - Battipav E..GO Serie Mode D'emploi

Battipav srl
31
2) make the lower wheel support slide on the adjustment slot until the vertical play is eliminated.
3) lock the lower wheel support again.
IN CASE OF LATERAL MOVEMENTS OF THE CARRIAGE, TIGHTEN ALL THE WHEEL SUPPORTS STILL FURTHER.
DISPOSAL
In the event of scrapping the entire machine, it must be disposed of in accordance with the methods laid down by current
legislation.
Main Casing
Submerged Pump
Electric Motor
R.A.E.E. IT08020000002803
The European Directive 2012/19/EU arranges that in the event of scrapping of electrical equipment, they must not be
disposed of city solid refusals but collected separately, in order to optimize the level of recovery and recycling of the
materials and above all in order to prevent damages to health and environment. To comply with European Directive
2012/19/EU, all electrical equipments must be marked with crossed basket symbol. The packing of the machine will be
disposed of in accordance with the methods laid down by current legislation. For further information concerning disposal of
electrical equipment, please refer to public administration service.
TROUBLESHOOTING
HAVE YOUR TOOL REPAIRED BY A QUALIFIED PERSON
This electric tool complies with the relevant safety rules. Repairs should only be carried out by qualified persons using original
spare parts, otherwise this may result in considerable danger to the user. Malfunctions not related to a conformity defect that
exists at the time of purchase are excluded from the warranty. Exclusions include:
• Wear of materials (taking into account the average life of the product)
• Failure to comply with the recommendations contained in this manual.
• Maintenance and tampering carried out by unauthorized personnel.
• Use of non-original spare parts.

EC DECLARATION OF CONFORMITY

BATTIPAV SRL (Z.I." Via Cavatorta 6/1-48033 Cotignola (RA) ITALY tel. 054540696 - info@battipav.com - www.battipav.com)
hereby declares under its sole responsibility that the E.GO product:
Series: E.GO / EGO PLUS
Art: TAB 1
Model: The E.GO / EGO PLUS site cutter is a machine intended specifically for cutting ceramics, marble, granite, bricks,
concrete items and similar materials, up to a thickness of 125 mm.
This Declaration relates to the following Directives:
2006/42/EC (MD), 2014/35/EU (LVD), 2014/30/EU (EMC), 2011/65/EU (RoHS II)
Reference to harmonized standards: EN12418:2000+A1:2009, EN61029-1:2009+A11:2010, EN60335-1:2012+A11:2014,
EN60335-2-41:2003+A1:2004+A2:2010, CEI EN 61000-6-1:2007, CEI EN61000-6-3:2007+A1:2013, CEI EN 61000-3-2:2015,
CEI EN 61000-3-3:2014
Date of manufacture - Series N.
Polyamide Steel Aluminum Copper
GB
Epoxy Resin
43