Connecting The Power Cord - SULPICE TV TESNB32HD01W Mode D'emploi

compartment (respect the right polarity). Put the cover
back in place.

Connecting the power cord

IMPORTANT: This television is designed to operate
solely with a 220-240V ~ 50 Hz. power supply. After
taking the television out of its package, wait a bit for the
TV to reach ambient temperature before connecting it
to the electricity plug. Connect the power cord to the
main plug.
Connecting the antenna/Cable
Connect the aerial or cable TV plug to AERIAL INPUT
(ANT-TV) socket located on the rear bottom side of
the TV.
Notification
Manufactured under licence from Dolby Laboratories
MANUFACTURED UNDER LICENCE
"Dolby" and the double D symbol are
trademarks of Dolby Laboratories.
HDMI, the HDMI logo and the high definition
multimedia interface are marks
or registered trademarks of HDMI
Licensing LLC.
Information applicable to users in relation to
disposal of old devices and batteries
[European Union only]
This symbol indicates that the equipment should not
be disposed of as household waste. If you have to
discard the TV set or the batteries, consider using
collection systems or infrastructure for appropriate
recycling.
Note: The Pb sign inscribed on the batteries indicates
that the battery contains lead.
Technical details
TV Frequency (tuner)
Number of memorable
channels
Audio standard
On screen display
RF Input Socket
Operating voltage:
AUDIO OUTPUT
POWER (WRMS.) (10%
THD)
Power consumption
st-by power
consumption
Weight Stand
TV Dimensions DxLxH
(with foot)
TV Dimensions DxLxH
(without foot)
Display
Operating temperature
and humidity
English - 20 -
Battery
Products
VHF (BAND I/III) - UHF
(BAND U) - HYPERBAND
1000
German +Nicam Stereo
On Screen Display
75 Ohms (unbalanced)
220-240V ~, 50HZ
2 x 6 WRMS
65W (max)
0,5 W (max)
7,00 kg
185 x 728 x 486 mm
34/63 x 728 x 428 mm
32"
0ºC up to 40ºC, 85%
humidity max