Product Description; Use And Operation; Cleaning And Care - oneConcept Icebreaker Mode D'emploi

PRODUCT DESCRIPTION

1 Ice chute
2 Housing
3 ON/OFF Switch
4 Ice container

USE AND OPERATION

1. Place the ice crusher (clear bowl) packed with the unit under the bottom
opening of the ice crusher. Plug the unit in and set the on/off power switch
to the on position. Note: ice crusher will not operate unless ice container is
secured into position.
2. To begin crushing ice, drop cubes into feeder chute opening on top of unit.
Blades of crus- her unit are self feeding. Do not attempt to push cubes into
blades with hand or instrument.
3. If a large cube should become lodged in the crushing unit so that blades
cannot reach it, set power switch to the off position and unplug unit from
outlet. Then pour warm water down through feeder chute until lodged
cube is melted or falls free. Plug unit back into outlet, set the power switch
to the on position, and resume feeding cubes through the feeder.

CLEANING AND CARE

• Unplug power cord form outlet.
• Pour hot water through top feeder chute to rinse out after each use.
• Wipe outside of ice crusher with a clean damp cloth.
EN
9