Safety Instructions
SAVE THESE INSTRUCTIONS – This manual contains
important safety and operating instructions for Roav
SmartCharge T2 car charger (Model R5114).
Please read and understand all instructions before using
this product. If damage is caused by failure to follow the
instructions, the warranty does not apply.
• Read all instructions and cautionary markings before
using this product.
• Do not expose to rain, moisture, or snow.
• Use of attachments not recommended or sold by the
manufacturer may result in a risk of fire, electric shock,
or injury to persons.
• Do not operate this car charger if it has received a sharp
blow, been dropped, or otherwise damaged in any way;
take it to a qualified service person.
• Do not disassemble this car charger; take it to a qualified
service person when service or repair is required.
Incorrect reassembly may result in a risk of electric
shock or fire.
• To reduce the risk of electric shock, unplug this car
charger before attempting any maintenance or cleaning.
Turning off controls will not reduce this risk.
• To reduce the risk of fire or electric shock, do not
interconnect output terminations.
• Avoid long exposure to direct sunlight, which may cause
damage to the device.
• Exposing this product to open flames may cause it to
explode.
• Do not use this product in strong magnetic fields.
02 English
• Use a soft, dry lint-free cloth to clean. Do not use any
corrosive cleaner or oil to clean.
• CAUTION - For continued protection against fire risk,
replace only with the same type and rating of fuse. The
fuse rating is 32V DC / 7A.
• Always obey traffic laws and pay attention to the road.
Do not attempt to use this device while driving as some
features are limited while the vehicle is in motion. Failure
to pay full attention to the operation of your vehicle
could result in death, serious injury, or property damage.
You assume total responsibility and risk for using this
device.
Introduction
What's Included
User Manual
English 03