Koenig KWC 602 Mode D'emploi page 18

English
Part list
Vacuum attachment wet (large)
A
Nozzle attachment (dry)
B
Release button
C
Vacuum atttachment wet (small)
D
Connection piece with release buttons
E
Dust filter
F
Vacuum port
G
ON/OFF switch
H
Indicator
I
DC-jack
J
Opening for extension piece
K
Lid
L
Spray bottle
M
Spray head
N
Spray nozzle
O
Extension connection piece
P
Dirt/water container with MAX- marking
Q
Lock of dirt water container
R
Wipe attachment with microfiber
S
Adaptor
T
Release button
U
Assembly
Wet vacuum
1
Push the connecting piece on the motor
1
block until it locks into place.
Put the desired vacuum attachment on
2
the connecting piece until it locks into place.
Dry vacuum
2
Mount the dust filter on the motor unit.
1
Push the connecting piece on the motor
2
block until it locks into place.
Put on the nozzle attachment.
3
Charging battery
Plug the adaptor to a mains socket and
3
insert the connecting jack into the charging
socket of the product. A beep sounds.
During charging the indicator will flash in
blue.
When charging is completed, 3 beeps sound
4
and the indicator lights off.
18
IM_KWC602_151222_V05_HR.indb 18
All manuals and user guides at all-guides.com
Indicator light and
signal sound
Indicator light flashes
for every 2 seconds
until indicator light
be off.
5 beep signal sounds
when the moment
machine stop working.
And indicator light
flashes for every 0.5
second, lasting for 1
minute.
1 beep signal sounds.
And indicator light
flashes for every
1 second, until the
battery fully charged.
Indicator light be off.
Then 3 beep signal
sounds.
Use the included accessories
Wiping attachment with spray bottle
Fill the bottle with water and if desired
5
with a cleaning agent suitable for window
cleaning. Screw the spray nozzle with
mounted wiping attachment on the bottle.
Place the spray nozzle into the wiping
attachment.
Extension tube
Attach the spray nozzle with bottle on the
6
provided insert opening.
Status
Low battery
Battery empty
Battery charging
Charging completed
22/12/15 3:05 PM