FanWorld FW11 Série Manuel D'installation Et D'utilisation page 110

Sleep Operation
The SLEEP function is used to decrease energy use while you sleep (and don t need the same
temperature settings to stay comfortable). This function can only be activated via remote control.
Press the SLEEP button when you are ready to go to sleep.
Note: The SLEEP function is not available in FAN or DRY mode.
Cooling mode
Set temp. (°C)
Heating mode
Set temp. (°C)
The machine will exit SLEEP mode
and return to normal operation
-1ºC
Fig. 1.3
The machine will exit SLEEP mode
and return to normal operation
+1ºC
Fig. 1.4
110
Time (h)
Time (h)