EarthWise SN71018 Manuel De L'utilisateur page 12

1. Open the left side plate by removing three screws.
(Fig. 18)
Screw
Fig. 18
2. Use your right hand to turn the rib side of the belt
up and pull upwards while turning the auger pulley
counterclockwise with your left hand. The belt can be
easily removed from the pulley. (Fig. 19 - 20)
Fig. 19
Fig. 20
MAINTENANCE
3. Put the belt on the drive pulley first and then place
the belt at the lower end of the auger pulley. (Fig. 21)
Fig. 21
4. Use right hand to press the belt with ribbed side
down. (Fig. 22)
Fig. 22
5. While holding the belt down with your right hand use
your left hand to turn the auger forward so that the
auger pulley rotates in a clockwise direction. (Fig. 23)
Fig. 23
12
Model SN71018