Filex 2062000001 Notice De Montage page 5

English
Assembly instructions
The figures between the brackets refer to the corresponding part number.
1. Attach the back panel (3) to the base cabinet (1) with two M5 screws (figure 1).
2. Attach the legs (4) to the countertop (2) on the other side using two M5 screws, nuts and
washers (figure 2).
3. Attach this construction to the shelf (3) using four M5 screws, nuts and washers (figure 3, 4).
4. Installing the countertop
For model 2062000001, base cabinet with door:
a. Remove the steel panel from the countertop.
b. Put the wooden countertop on the structure and align the fixing holes to the correct
position.
c. Attach the wooden countertop to the construction using six screws, nuts and washers
M8 (figure 4).
d. Slide the steel panel over the wooden countertop from the front (figure 4).
e. Fix the steel panel with M4,2x19 self-tapping screws to the sides.
For model 2062000002, base cabinet with drawer and door:
a. Remove the steel panel from the countertop.
b. Remove the drawer from its guides. This can be done by pulling the drawer completely
out and then pressing the locking tabs on the left guide upwards and on the right guide
downwards (see figure 5).
c. Put the wooden countertop on the construction and align the fixing holes to the
correct position.
d. Fix the wooden countertop to the structure using six screws, nuts and washers M8
(figure 4).
e. Slide the steel panel over the wooden countertop from the front (figure 4).
f. Fix the steel panel with M4,2x19 self-tapping screws to the sides.
All manuals and user guides at all-guides.com