Dvd Operation - LENCO DVL-1662BK Mode D'emploi

DVD Operation

Basic Operation
Press the Power button on the TV or the remote control, then press the INPUT button to
select DVD mode.
If there is no disc in the DVD player the screen will show "NO DISC".
Insert Disc according to picture next to disc slot. Do not touch the playing surface.
Hold the disc around the outside with your fingers and place the disc into the slot. The
player will automatically draw the disc into the player.
To "Eject" the disc, press the EJECT button on the TV or the "
control.
Disc Eject
If not in DVD-mode, press INPUT-key on remote and select DVD. Press OK.
Press -key on remote. Disc ejects.
Return to Tuner-mode (watch TV)
Press INPUT-key on remote. See the INPUT SOURCE window appear. Select DTV or
Satellite and press OK-key.
DVD Setup Mode

Setup Mode provides the menu for the configuration of General Setup Page, Audio
Setup Page, Dolby Digital, Setup, Preference Page.

Item selection in the Setup Menu is done by using the Navigation Arrows, SETUP
button and the OK button.

Press the SETUP button first, enter into SETUP menu, then press the DIRECTION
RIGHT button, you can enter into the next Sub-menu.

Press the SETUP button again to exit the Setup Menu.
41
" button on the remote