Operating Lnstructions 06 / Cleaning & Maintenance - Serene House Aerolite Mode D'emploi

Operating Instructions
• Please remove all packaging before use.
1 3
Peel away the color
film seal only on the
Serene Pod ® . Do not
remove the
transparent micro
perforated film on
the inner layer.
2 4
5
Place the Serene Pod ® onto
the heating plate.
Caution:
1. Only Serene Pod ® from SERENE HOUSE can be used with this product; do not heat liquids or
other objects in the heating plate.
®
2. Serene Pod can be heated repeatedly. If the scent fades or the diffusing performance drops,
please consider replacing the Serene Pod ® . The Serene Pod
contact your local distributor for purchase.
3. Do not move or touch when this product is in use. Allow the wax inside Serene Pod
thoroughly into a solid form before handling the device or Serene Pod
4. Unplug from power source when not in use.
5. Always place this wax warmer on a firm, flat and level surface.
6
Place the top cover
back onto the main
unit.
Plug the power
cable into a nearby
outlet.
Turn on the power
switch.
® is a consumable item; please
® to cool
® .
Cleaning & Maintenance
• Always disconnect the product from its power source prior to cleaning &
maintenance.
• Never soak or wash this product directly as it may cause mechanical malfunction
or danger.
• Never use acidic cleansing agents as it may cause malfunction to the product.
• Please perform cleaning & maintenance at least once a week; failing to do so
may cause the product to malfunction. Please maintain it on a regular basis.
• Allow to dry thoroughly before use.
1 2
Turn off the power switch.
3 4
Remove the Serene Pod ® .
Unplug the power cable from
the outlet.
Please use a damp
cloth, moistened with
warm water or neutral
cleaning agents, to
clean the heating plate
until it is clean. Place
the Serene Pod ® back
onto the heating plate
and place the top
cover back onto the
device. This completes
the cleaning and
maintenance process.
7