Strainer Installation - Glacier bay QL068 Manuel De L'utilisateur

Installation (continued)

STRAINER INSTALLATION

1 . Apply a ring of sealant to the underside of the strainer flange.
2 . Insert the strainer body into the sink .
3 . Assemble the rubber gasket, friction washer and locknut onto
the strainer body from under the sink .
4 . Hand tighten the locknut . Do not over tighten the locknut as it
may split or deform the strainer body .
5 . Remove excess sealant from around the strainer body .
All manuals and user guides at all-guides.com
7
Basket
Sink
HOMEDEPOT .COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance .
Sealant
Strainer body
Rubber gasket
Friction washer
Locknut