fetra RSOURCE 2500 Notice De Montage page 8

Chariot dossier de pouss©e
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

All manuals and user guides at all-guides.com
Usage
The platform trolley must be used, maintained and repaired in accordance
with the producers´ instructions. The product must not be changed or fitted
with accessory equipment without making sure that the trolley is still safe.
Before using, the operator must read all instructions and warning notices of
this manual and on the equipment carefully.
Please do not use a trolley without checking its operational condition.
Keep attention on the rolls, the push handle or the drawbar.
In case of parking the trolley you always have to apply the wheel locks.
In case of loading and unloading you also have to apply the wheel locks.
Do not exceed the maximum carrying capacity. The specified carrying
capacity refers to an evenly distributed load on the complete platform.
The loading has to be protected against falling down.
To guarantee stability it is important to move the loaded trolley slowly
without jerk.
Not to use on sloping grounds to avoid the possibility of overload or loss
of control.
Sometimes it can be necessary to drive on inclined surfaces, for example to
move the trolley from one building to another.
In this case the inclination must not exceed 2% and the trolley has to be
unloaded.
The operator has to wear safety shoes.
When transporting loads other persons have to stay away from the trolley
of at least 600 mm.
Under other special conditions, the operator should always pay attention
when using the trolley.
Transport equipment
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rsource 2501Rsource 2502Rsource 2503

Table des Matières