Safety Information - Xoro HTL 400 T Manuel D'emploi

All manuals and user guides at all-guides.com
User Manual
1. All the safety and operating instructions should be read before the product is
operated.
2. Retain Instructions - The safety and operating instructions should be retained for
future reference.
3. All warnings on the product and in the operating instructions should be adhered
to.
4. All operating and use instructions should be followed.
Power Supply
1. Never touch the plug with wet hands.
2. If you want to pull the plug out of the plug socket, always pull directly on the
plug. Never pull on the cable as it could tear.
3. Make sure that the power cable is not bent, caught or run over and that it does
not come into contact with heat sources.
4. Make sure that the power cable is not wound around the device while in opera-
tion.
5. Never place the machine on the power cable while it is being operated.
6. Only use extension cables that are designed for the power consumption level of
the machine.
7. Keep the appliance away from rain and any moisture.
8. Only operate the machine if the electrical voltage stated on the type plate be-
neath the machine agrees with the voltage on your plug socket. The wrong
voltage can destroy the machine.
9. Do not stand vases etc. on the appliance. Water could seep into the appliance.
10. Do not open the appliance.
11. Pull out the mains plug if the appliance is not to be used over a longer period of
time.
12. Take care that nobody can trip over the power supply cable.
Antenna
The HTL 400T has an extendable antenna for reception of DVB-T signals.
4

Safety Information

HTL 400T