Publicité
Les langues disponibles
Les langues disponibles
operAtion - general
The manicure/pedicure set is intended only for
domestic use, not for professional use.
1. Attachments
2. Storage case
3. Adapter
4. Manicure/pedicure appliance
operAtion - before first use
1. Make sure that the On/Off switch of the
manicure/pedicure appliance is set to 0 (Off).
2. Fit the adapter's plug (Figure 2) in the socket in
the appliance's base.
3. Insert the adapter into the wall socket. The
appliance's charging light will now illuminate.
4. Allow the appliance to charge for between 16
and 24 hours. The appliance may become
slightly warm whilst it is charging. This is
normal, and does not indicate that the appliance
is defective.
5. Remove the adapter from the wall socket. The
appliance is now ready for use.
You
cannot
use
appliance whilst it is charging. You can use
the appliance only once it is charged and the
adapter's plug has been removed from the
appliance.
All manuals and user guides at all-guides.com
the
manicure/pedicure
16
instruction manual
2
1
3
4
Publicité
