Appliance Description; Application Overview; Preparation - Beem Cyclone Mega-Clean Notice D'utilisation

EN

Appliance description

(See illustration on the left fold-out page)
1 Drive unit with handle
2 Filter cover
3 Filter element
4 Dust container
5 Nozzle socket
6 Textile brush
7 Joint nozzle
8 Charging station with power adapter
9 Charging control indicator
10 Dust container release button
11 ON/OFF switch
12 Joint and
textile brush storage compartment
13 User manual (not illustrated)

Application overview

The following table will help you select the
right brush or nozzle:
Application
■ Upholstery/car
seats
■ Furniture
■ Joints, corners, dif-
ficult locations to
access
BEEM - Elements of Lifestyle
All manuals and user guides at all-guides.com
To fix the charging station (8) to a wall,
proceed as follows:
‹
‹
‹
Attachment
Joint nozzle
Textile brush
Textile brush
Joint nozzle
Cyclone Mega-Clean

Preparation

fixing the charging station
to the wall (image D1)
Drill two holes with the prescribed gap
under each other (image D1).
Insert the supplied dowels into the
holes in the wall.
Screw the charging station (8) firmly
onto the wall with the screws supplied
(image D1).
NOTE
► You can also put the charging station
(8) onto a horizontal surface.
► Before drilling the holes, make sure
you do not damage possible water
pipes and cables.
21