CDR MLB242 Guide Rapide

MLB242 analyser by CDR – Short Guide
Analysis systems based on the MLB242 analyser are:
, CDR WineLab
CDR FoodLab
Junior
CDR OxiTester
Junior
These short instructions do not replace the complete user's manual.
For the installation of the instrument proceed as follows:
A. Place the
MLB242 analyser
extreme temperature fluctuations or excessive light.
B. Connect the external power adapter to the port at the rear of the instrument using the appropriate power cord to the
mains (110V to 230V).
C. After power ON the analyser, the photometer optics
will be controlled together with other functional parts.
Appears on the screen:
Test applications are loaded into the working memory for quick access. 1 minute required.
Followed automatically by next dialogue:
After that the Main dialogue is shown:
Complete user's manual available for download from: resources.cdrfoodlab.com
, CDR BeerLab
Junior
on a plane surface in such a position that it is not exposed by mechanical vibrations or
PLEASE WAIT is shown while power up to
operating temperature.
10 minute required.
Use "SETTINGS" to configure your system.
Use "PERFORMD TESTS" to get information from Data
Base.
Use "TESTS" to run alayses.
, CDR CiderLab
Junior
ON/OFF button
To switch OFF press
for 3 seconds
MAN505
,
Junior
24V DC electric power port
.rev01