Insignia NS-RFD21SS9-C Guide De L'utilisateur page 15

7 Remove the two hinge pins from the hinge brackets using a 1/4" hex-key wrench.
Left hinge pin
8 Remove the screws securing the center hinges to the cabinet using a 5/16" socket ratchet.
Left center hinge
9 Remove the screw on each side of the freezer drawer railing, then lift up on both sides of the freezer drawer to separate
the drawer railings from the rail assemblies. Make sure that you place your freezer drawer on a non-scratch surface and
push the rail assemblies back into locking position.
10 Move your refrigerator into its final position, then re-install the drawers and doors by reversing these steps.
All manuals and user guides at all-guides.com
www.insigniaproducts.com
NS-RFD21SS9-C
Right hinge pin
Right center hinge
Rail assembly screw
15