Technical Specifications - Extel NOMAD 13 TPS-218 Guide D'installation Et D'utilisation

- Changing the fuse: Disconnect all the elements of the charger (DC output on stop) unscrew the 10 screws in the
charger and open the cover. Disconnect the black wire on the battery. Change the fuses. Reconnect the black wire.
Refit the cover and the screws.
- Changing the battery: The battery in the charger 12V /7Ah must be changed every 2 years. Unscrew the 10
screws on the charger and open the compartment. Take out the battery and disconnect it. Install a new battery. Take
care to match up the polarities correctly (red + black-) Refit the cover and the screws.
Warning: initially the battery charge will not be at the optimum level. It takes several days of
charging for your system to reach optimum capacity.
4

TECHNICAL SPECIFICATIONS

a. Charger:
- Rated voltage: 12V
- Rated battery capacity: 7 Ah
- Operating temperature: -20°, +55°C
- Dimensions: 250 x 230 x 100 mm
5
MAINTENANCE
It is advisable to clean the panel regularly for optimum recharge capacity. The guarantee is void if parts have been
dismantled. Clean the outside with a soft dry cloth only.
Warning: Do not use any carboxylic acid or alcohol-based or other similar product or solvent. In addition to the
risk of damage to your device, fumes are also dangerous to health and are explosive.
For cleaning purposes do not use any tool that may act as a voltage conductor (e.g. metal brush or sharp tool) or
that could potentially scratch the glass.
TECHNICAL ASSISTANCE - GARANTEE
6
Fault
No voltage on the
various outlets
Charging problem
If necessary, our technical website is at your disposal www.cfi-extel.com
Last version of the dowloadable manual in color on : www.cfi-extel.com
GUARANTEE CONDITIONS :
The guarantee does not cover: the consumables (batteries, etc.) and the damages caused by: misuse, improper
installation, external intervention, deterioration by mechanical or electrical shock, fall or atmospheric phenomenon.
The sales slip or the invoice is required as proof of purchase date.
All manuals and user guides at all-guides.com
b. Panel
Rated voltage: 17.5V
- Maximum power: 13W
- Operating temperature: -40°, +85°C
- Dimensions: 440 x 300 x 25 mm
- Weight: 4,685 kg
Cause
Short circuit
12V/24V switch on 24V
- Battery > 2 years
- Incorrect orientation of the
solar panel
HOTLINE :
This device is guaranteed for labour and parts in our premises.
CFI EXTEL NOMAD 13 - 12/2010 - V1
c. LED light
- Rated voltage: 12V
- Maximum power: 5W
- Operating temperature: -20°, +50°C
Solution
Check the fuses
Check the position of the 12V/24Vswitch
- Change the battery
- Change the orientation of the solar panel
€
GB