Trouble Shooting Guide - weewell WHC 752 Mode D'emploi

Humidificateur

Masquer les pouces

Table des Matières

Les langues disponibles

3.Put the water tank on the main body.

4.Check if the rated voltage meets the input voltage, and plug in the socket.

5.Switch on the machine; the background light of LED will be on. The machine begins to

work.

6.Touch the symbol "MAX-MIN", you may adjust the mist volume. On the remote control,

just press the button of "MIST VOLUME".

7.Touch the symbol "OZONE", the ozone generator works. On the LED display, it shows the

shape of trees. Touch again to stop the function.

8.Touch the symbol "HEATING", the warm mist will come out after 10 minutes. On the LED

display, it shows the shape of fire. Touch again to stop the function. Mist will become cool.

9.Constant humidity: Before you touch the symbol "HUMIDITY", LED display shows the

current humidity. You may set the humidity arranged from 45%RH to 90%RH. Press once,

it will increase by 5%RH. When it reaches 90%RH, press again, it will back to 45%RH. After

you set the expected humidity, the machine will keep the memory after 5 seconds. 5

seconds later, LED display shows the current humidity. If the expected humidity is less than

the current humidity, the machine will be in sleeping state. But if the expected humidity is

higher than the current humidity, the humidify function will work.

10.Timer setting: There are 12 timer setting: 1,2,3,4,5,6,7,8,9,10,11,12 hours. Touch the

symbol "TIMER", LED display shows the timer. The timer shows the rest operation time

and decrease by 1 hours, i.e., if set the timer at 12 hours, LED display shows 11 after one

hour. Once you have set the timer, the value of time remaining in timer and the room

temperature will display 30 seconds alternating in the middle of LED display.

11.Once the water in the basin is too little to keep the machine working, the machine will

automatically stop working. LED shows the shape of lack of water. Refill the water, and the

machine will restart.