Interlink BEPPO 40 100 660 Notice De Montage page 3

ENGLISH
1 .}
Before starting, please read our assembling instructions carefully and make yourself familior with them.
2.) Follow our assembling instructions carefully.
3.) Compare the listed parts and fitting list to the contents of the cardboard.
4.) Prepare the necessary tools for assembling and make sure that the tools are in proper condition. Bad tools lead
in some way to difficulties during the assembling.
S.} To make sure that the fumiture will not be damaged or grated during assembling, prepare an adequate area and
cover the floor with the cardboards or onother soft pad (Le. cloth or carpet).
6.) We recommend operating always with two or more people.
7.) 00 not overwind screws. Check the screws from time to time and if necessory retight them.
a.) Keep the instruction and service sheets. Perhaps you will need them later on.
For wooden furniture consisting of glass and steel or MOF and coated surface:
Wooden Furniture: Stains can be taken off with a soft, moistened cloth or by using a special polish (available in
supermarket and specialized stores). But do not forget to wipe the surface with a dry and soft cloth afterwards.
Steet furniture:
The metal has a varnished surface. The material could show little discrepancies in colour, c10uds or stains due to the
machine made production which should not be a reason for a complaint.
If some metal parts have been twisted out of shape during transport, you could carefully try to twist them into the
original position. Please do not overwind the screws and retight them from time to time.
MOF and coated surfaces:
MOF consists of wooden fibres (please read the a.m. instructions). 00 not work on the coated surfaces with knives
or sharp objects, as this could cause damage the material.
That should not be a reason for complaints afterwards.
Oue to machine made production, the MOF parts can have sharp edges. You could chamfer them with a fine
standard sand paper. Please do it carefully in order to make sure that you will not remove too much of the material.
Carrying out the assembly is for adults only. Please, keep your children away during assembling. Children might
take small parts or fittings away or swallow them up. Ouring assembling it could also happen that parts of your
furniture fall down on your children. Please, therefore, protect them and make sure that you carry out the assembling
in their absence.
If your piece of furniture consists of glass, it should be handled carefully during assembling. Glass can break at any
time and cause injuries. Therefore, you should protect your eyes and hands by wearing special c10thing and safety
shoes, available in the supermarkets and specialized stores.
We are not liable for any material damage or injuries resulting from faulty assembling. We are also not Iiable for
any damage resultant from lack of maintenance during use. (Le. retightening of screws, and ete. ..). We are not
Iiable for any damage caused by faulty use or use against its purpose.
We wish you a lot of joy and pleasure with your new piece of furniture.
Your Quality Assurance Team by Inter Link SA
All manuals and user guides at all-guides.com
'mportant assembling suggestions:
Maintenanee adviee:
Warning:
3/8