Replacing The Battery - Hama KW-50 Mode D'emploi

Masquer les pouces Voir aussi pour KW-50:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6

Replacing the battery:

Replace the battery when the "lo" symbol, which indicates a low battery level, is
displayed:
1. Remove the battery compartment cover
2. Insert a CR2032 battery and double check that the polarity is correct.
3. Replace the cover of the battery compartment.
Warnings
1. Do not try to repair the scale or take it apart.
2. Dispose of old batteries in accordance with local regulations. Do not throw old
batteries into a re.
3. Keep batteries out of the reach of children and pets to prevent them from playing
with batteries or accidentally swallowing them. If a battery is swallowed, call a
doctor immediately.
4. Batteries can explode if used improperly. Do not attempt to recharge the
batteries or take them apart.
5. Only use new batteries in the correct size and pay attention to the type speci ed.
Never mix old and new batteries, different types of batteries or rechargeable
batteries with different capacities.
6. Use a slightly damp cloth to clean the scale. Do NOT immerse the scale in water
and do not use any chemical cleaning products or scouring agents.
7. Do NOT place heavy loads on the triangular ring for longer periods of time.
While travelling, keep the scale away from sharp objects such as toys, writing
utensils, etc., to prevent the scale from accidentally being switched on and using
up the batteries.
8. To ensure accurate measurements, do NOT use the scale in areas with strong
magnetic elds.
All manuals and user guides at all-guides.com
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10538000128786

Table des Matières