Start-Up - DS Produkte KA-SA03 Mode D'emploi

GB
Mounting on the wall
1. Use the enclosed fastening material to mount the
hanging fi xture. The type of mounting material de-
pends on the composition of your wall. Please also
be absolutely sure to observe the safety notes for
mounting.
2. Securely clamp the motion detector on the hanging
fi xture using the recess on the back.
3. Use the spherical joint of the hanging fi xture to set
the correct position.

Start-up

1. As soon as batteries have been inserted in the mo-
tion detector, it will switch to standby mode.
2. To switch the motion detector and alarm on, press
the On/Off switch on one of the remote controls. The
green LED will illuminate and you will hear a beep
sound.
3. The alarm has now been activated. Leave the room
within 20 seconds to prevent the alarm from being
activated.
4. If the motion detector detects movement, the red LED
will fl ash and a continuous loud beep will be emitted
for approx. 40 – 50 seconds.
5. The alarm will then switch back off, but the motion
detector will remain in alarm mode and trigger the
alarm again if further movement is detected.
6. To switch the alarm and motion detector off, press the
On/Off switch on one of the remote controls again.
3_DE-GB-FR-NL_A6_V1.indb 20 _DE-GB-FR-NL_A6_V1.indb 20
All manuals and user guides at all-guides.com
20
02.04.2015 15:26:13 02.04.2015 15:26:13