Beamz professional WI-DMX WIRELESS Manuel page 5

Note:
Make sure the distance of the two controllers is between 0.6 and 10 meters when matching and they
can be used far away after matching successfully.
With memory save functions, the work mode and frequency band are kept before power off.
Functions for 3-pin male and female connectors
DMX512 signal input /output
1: DMX Signal coverage, 2: DMX signal, 3: DMX signal +
LED Function
Power: Power Indicator
Signal: Signal Indicator
MAINTENANCE
The unit should be cleaned periodically to ensure the optimum performance, the smudginess can
decrease the life of light and the output of light is affected by the dust which can make the machine
overheating. In general, make the maintenance at least two times a month. Be sure to power off the
unit before cleaning.
Do not clean until the unit recovers normal temperature since high temperature for using, use the lens
tissue or soft cotton cloth with alcohol to wipe gently.
Cleaning frequency depends on the environment in which the fixture operates, damp, smoky or dirty
surrounding can cause greater accumulation of dirt on the optics. Never rub or press strongly on the
panel.
SPECIFICATION
Voltage Adapter ........................ 100-240V AC 50/60Hz
Voltage.................................................. 9VDC / 500mA
Power .................................................................... 4.5W
Wireless DMX frequency .......... 2.433GHz – 2.481GHz
Distance: ...................... R-T signal far from 250 meters
Weight ................................................................. 0.18kg
Size .............................................. L96 x W65 x H32mm
This Class-I 2.4GHz equipment can be placed on the EU market without restrictions.
Deze klasse-I 863-865MHz apparatuur kan op de EU markt zonder beperkingen worden
gebruikt.
Diese Klasse-I 863-865MHz Ausrüstung kann auf dem EU Markt ohne Einschränkungen verwendet
werden.
- 5 -