Samsung HW-NW700 Mode D'emploi page 25

3. Plug in the Wireless Subwoofer, and then check its standby status.
• Plug the Wireless Subwoofer power cord into an electrical outlet and into the Wireless
Subwoofer to turn on the Wireless Subwoofer. The LINK LED indicator (blue LED) on the
Wireless Subwoofer blinks. If the LED does not blink, press the ID SET button on the bottom of
the Wireless Subwoofer with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in
Blue). For more about the LED, please refer to the SWA-W700 user manual.
Bottom of the Wireless Subwoofer
• The main unit is heavy. Be careful not to pinch your fingers when pressing the ID SET button or
connecting the power cord to the bottom of the unit.
• The upper part of the subwoofer is prone to scratches. Handle it carefully.
Rear of the Wireless Subwoofer
POWER
POWER
5 Sec
ID SET LINK SERVICE
ID SET LINK SERVICE
Speaker Unit
Front of the Wireless Subwoofer
Do not press on or strike the Speaker
Unit on the rear of the body. You can
deform or damage the speaker.
ENG - 25
Blue
blinking