Publicité
Les langues disponibles
Les langues disponibles
STEP 3
1.
Install two (2) rubber gaskets (part #11) to the back panel (part #4).
2. Use four (4) 1/4" x 1/2" Phillips roundhead screws (part #12) to connect the back panel (Part #4) to the right
side (part #2 and #6, see step 2).
3. Use four (4) 1/4" x 1/2" Phillips roundhead screws (part #12) to connect the back panel (part #4) to the left
side (part #3 and #7, see step 2).
24
Publicité
