Hathaway WESTWOOD FREE STANDING Instructions De Montage page 5

ASSEMBLY INSTRUCTIONS (Cont.)
Step 3: Screw thread bolts #21 into cover plate #7 and side panel #6. Insert gears #20 into storage
shelves #9. Attach cover plate #7 and storage shelves #9 to side panel #6 with gear #20
as shown. Repeat for other side panel #6. Attach magnetic part #26 to pre-drilled holes on
center of long side of board #7 with screw #14.
#7
#26
#11
Step 4: Attach the bottom back board #10 to the assembled cabinet with screw #19.
#14
#20
#21
#9
#9
#20
#6
#21
#6
#21
#20
#9
#20
#21
#19
#10
Note: Finished edge will
face front and the gears
will be on the bottom of
all storage shelves.
#21
5