Electrical Connections - Cree NTW Serie Instructions D'installation

Masquer les pouces Voir aussi pour NTW Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

FCC
CAUTION: Changes or modifications not expressly approved could void your authority to use this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
CAN ICES-005 (A)/NMB-005 (A)

ELECTRICAL CONNECTIONS

STEP 1:
Make the following Electrical Connections to supply cord:
a. For 120/277/347V connect the black fixture lead to the
voltage supply or Hot 1 (for 208/240/480V wiring).
b. For 120/277/347V connect the white fixture lead to the
neutral supply or Hot 2 (for 208/240/480V wiring).
c. Connect the luminaire ground (green or green/yellow)
lead to the supply ground lead.
d. If Dimming is an option; connect the violet dimming
positive lead to the supply dimming positive lead. Cap off
if not used.
e. If Dimming is an option; connect the grey dimming
negative lead to the supply dimming negative lead. Cap off
if not used.
f.
NOTE: For dimming connections, use Class 1 wiring
methods only.
© 2019 Cree, Inc. All rights reserved. For informational purposes only. Content is subject to change.
See http://lighting.cree.com/warranty for warranty and specifications. Cree
Cree, Inc.
3 of 3
All manuals and user guides at all-guides.com
and the Cree Logo are registered trademarks of
®
LINE-BLACK
LINE
OR HOT 1
GROUND-GREEN
GREEN
NEUTRAL
NEUTRAL-WHITE
OR HOT 2
VIOLET
DIM (+) VIOLET
GREY
DIM (-) GREY
LUMINAIRE
lighting.cree.com
LPN00628X0001A0_A

Publicité

Table des Matières
loading

Produits Connexes pour Cree NTW Serie

Table des Matières