NPG BS-N2020-DTHD Manuel D'utilisation page 22

BS--N2020-DTHD Sound Bar
Skip TV or Radio Channel
1. Select the channel you would like to skip and press the GREEN button.
A skip symbol is displayed. The channel is marked as a skip.
2. Repeat the previous step to skip more channels.
3. To save your settings and exit the menu, press EXIT key.
Disable the Skip Channel function
Select the Skip channel and press the GREEN button on the remote control to can-
cel.
Move a TV or Radio Program
1.Select the preferred then press the RED button. A move symbol will appear.
2.Press UP/DOWN to move
3.Press OK to confirm
4.Repeat the above steps to move more channels.
Lock Program
You can lock selected programs for restricted viewing. Lock a TV or Radio chan-
nel:
1.Select the preferred channel then press the YELLOW button. A lock-shaped
symbol is displayed. The channel is now marked as locked
2. Repeat the previous step to select more channel .
3.To confirm your setting and exit the menu, press the EXIT button.
4.Press the YELLOW button to disable the locked channels function.
5.To view the locked, you will be required to enter either the default password
'000000' or your last set password. The master unlock password is '888888'
(b) EPG (Electronic program guide)
The EPG is an on-screen TV guide that shows
scheduled programs seven days in advance for
every tuned channel. Press the EPG button on
the Remote Control to access the guide.
20 ENGLISH
All manuals and user guides at all-guides.com
(c) Sort
Sort your channels from the following options:
[By LCN] – Sort the channels in ascending order.
[By Service Name] – Sort the channels in alphabetical order.
[By Service ID] – Sort the channels according to the station.
[By ONID] – Sort the channels according to ONID.
(d) LCN(Logical channel number)
Set LCN on or off.
(2.) Picture Setting
To access the Menu, press MENU then se-
lect [Picture] using the RIGHT/LEFT key.
The Menu provides options to adjusts the video
settings. Press UP/DOWN to select an option
and press RIGHT/LEFT to adjust that setting.
Press EXIT to exit the menu.
(a) Resolution
You can change this setting if the picture resolution does not appear to be correct
This setting is to match the most common setting for HDMI
[480P]: for NTSC TV system
[576P]: for PAL TV system
[720P]: for NTSC or PAL TV system
[1080i]: for NTSC or PAL TV system
(b)TV Format
If the picture does not appear to be correct you can change this setting.
This should match the most common setting for TV in your country.
[NTSC]: for NTSC TV system
[PAL]: for PAL TV system