How To Use As A Dry Iron; How To Care For And Store Your Iron - Panasonic NI-WT980 Mode D'emploi

How to use as a dry iron

1
1
Set the Steam/Dry Selector to the Dry
position.
2
2
Position the iron Heel rest position, set the
Power Switch to " ".
3
3
Plug the Power Plug into a household outlet.
4
4
Set the Power Switch to " ".
The Thermostat Operating Indicator Light goes on.
• If the temperature of the Soleplate is high, the
Thermostat Operating Indicator Light will not go on.
5
5
Use iron after preheating it until the Thermostat Operating
Indicator Light goes out, which usually takes about
1 minute.

How to care for and store your iron

3-way cleaning
►METHOD (1) Using the Self-Cleaning feature
1. Fill the Water Tank with tap water as described in "How to fill with the Water
Tank".
2. Set the Power Switch to " ".
3. Plug the Power Plug into a household outlet.
4. Set the Power Switch to the " ".
5. After the Thermostat Operating Indicator Light has
gone out, set the Power Switch to " " and unplug
the Power Plug.
14
All manuals and user guides at all-guides.com