GE UVD-IP-EVRDNR Manuel D'utilisation page 12

All manuals and user guides at all-guides.com
To adjust the camera zoom and focus:
1. Loosen the zoom ring thumbscrew.
2. Turn the zoom ring to set the desired zoom.
3. Tighten the zoom ring thumbscrew.
4. Loosen the focus ring thumbscrew.
5. Turn the focus ring to set the desired focus.
6. Tighten the focus ring thumbscrew.
Connecting an analog monitor to set camera functions
Connect a standard video monitor to the system to adjust the quality of
the video image using the DIP switches. The DIP switches can also be
adjusted when connected to the IP system.
To connect a video monitor:
1. Plug the monitor output cable to the video monitor output
connector (see Figure 1 on page 8).
2. Connect the BNC cable to the video monitor.
3. Adjust the DIP switches as desired.
Setting camera functions
You can set up six camera functions using the DIP switch bank on the
back of the camera. Figure 5 on page 14 shows the DIP switch layout.
White balance (WB)
White balance tells the camera what the color white looks like. Based
on this information, the camera will then display all colors correctly.
There are two methods to determine the WB:
• ATW (auto tracking white balance). The value used depends on
the lighting condition selected. It ensures reliable color
reproduction when lighting conditions change frequently.
EN - 12 UVD-IP-EVRDNR(-P) Camera User Manual