Publicité
HARDWARE KIT QUANTITIES
Configuration
Hardware Kit
1-Bay
91-00514
2-Bay
91-00515
3-Bay
91-00516
INTRODUCTION
NOTE:
• Please take the time to carefully unpack and inspect all components and gather all corresponding
instruction sheets.
• Instruction sheets may also be accessed at www.legradav.com.
• FOR 2- AND 3-BAY C5-FF22-X MODELS ONLY: Install the rear anti-tip feet before proceeding.
For more information, see "Rear Anti-Tip Feet Installation (C5-FF22-X Models Only)" on
page 13.
•
Rear anti-tip feet are pre-installed on 1-bay models.
• Front anti-tip feet are pre-installed on all models.
• Once your credenza assembled and positioned in its final location, lower the front and rear
anti-tip feet (by unscrewing them from brackets) . For more information, see "Lowering Front and
Rear Anti-Tip Feet" on page 13.
Woodworker's Kit Page on www.legrand.com
If you are providing your own woodwork for your credenza, access the Woodworker's Kit page at:
https://www.legrandav.com/Resources/360_Product_Overviews/C5-Woodworkers-Kit
• Download a .zip file of engineering drawings by clicking the C5 part number that corresponds with
the number of bays and the depth of your credenza.
• When reviewing the drawings provided in the .zip file, analyze the frame measurements and
dimensions for the C5 Series WoodKit (the one that we sell) when creating your own custom
woodkit.
9
1
0 -
0
5
0
8
(2x) 91-00508, (2x) 91-00518
(3x) 91-00508, (3x) 91-00518
2- AND 3-BAY C5-FF22-X MODELS ONLY
(8x) #10-32 x 3/8" Thread
Forming Screws
9 /
1
0 -
0
5
1
8
(2x) Rear Anti-Tip Feet
Page 5
91-00517
91-00517
91-00517
Publicité
