Technical Data - ALPATEC MG 9 Mode D'emploi

All manuals and user guides at all-guides.com
notice MG9: notice MG2.1-06

TECHNICAL DATA

Capacity 12 kg ice cube / day
Power : 150 W
Volt : 220-240V
9 ice cubes / cycle
Contains gas with fluorinated greenhouse effect that depends on the protocol of Kyoto.
Before the first use or after a long break without using the ice maker, we suggest you to make a few
round and through the cubes away. Then drain the product.
1.- Open the cover.
2.- Take out ice tank.
3.- Fill water tank with fresh and potable water. Never exceed Max level.
4.- Replace ice tank and close the cover.
5.- Plug the appliance, D light indicator flashes on (it means appliance is plugged).
6.- Press E button. D light indicator lights on and ice cube size light indicator A lights on.
The appliance and air vent starts working.
7.- Press Mode button to change the size of ice cube. Corresponding A light indicator lights on.
8.- To switch off the appliance, press E button, D light indicator flashes (it means appliance is plugged) and
ice cube size lights indicators A lights off. Unplug the appliance in order to disconnect completely..
IF THE APPLIANCE IS NOT IN USE DURING FOR A LONG TIME, IT'S RECOMMENDED TO DRAIN ALL WATER
LEFT IN THE TANK BY THE WATER DRAIN CAP.
* The first cycle can be longer than others.
27/01/10 14:34 Page 9
USING
USING
9