Assembling And Attaching Accessories - Homeright SteamMachine 052 Manuel D'instruction

Assembling and Attaching Accessories

Attaching Large Brush, Angled Adaptor, Extension Wands
and Cleaning Cloth
ALWAYS attach accessories before turning the unit on.
1
Slide the angled adaptor into the large brush
receptacle. The adaptor must be angled down.
Cleaning Cloth
Never remove the cleaning cloth while the machine is in operation or warm to the touch.
1
Lay one cleaning cloth on a flat surface.
The large brush and cleaning cloth are
perfect for use on these hard floor surfaces:
• Stained Concrete
• Linoleum
• Marble
www.homeright.com
2
Rotate the adaptor 90° to set into place.
Align the brush adaptor with the end of the
extension wand so that the oval hole on the
adaptor aligns with the lock/release button on
the wand.
2
Place the large brush over the cleaning cloth.
• Granite
• Ceramic Tile
• Vinyl
Press down on the lock/release button. While
continuing to hold button down, slide brush head
adaptor onto extension wand. Press firmly until
button snaps into hole.
Press down on a clip on the bush and fold the
end of the cloth beneath the clip. Release the
clip to fasten the cloth into place. Repeat for the
opposite side.
WARNING: Do not use on unsealed hard wood, laminate
flooring or unglazed ceramic surfaces. Surfaces that are not
properly sealed may be warped or damaged by exposure to
heat and moisture. Always test a small area before beginning.
3
3
English
7