Countdown - LEXIBOOK Spider-Man TimeProjector RP200SP Guide De L'utilisateur

All manuals and user guides at all-guides.com

Countdown

1. In time mode, press [MODE] thrice to select the countdown
function.
2. To set the time at which you wish the unit to count down from,
press and hold [SET] until hour digit flashes. The maximum time
is 23 hours, 59 minutes and 59 seconds.
3. Press the or
4. The minutes' digits flash. Press the
minutes.
5. Press [SET] to confirm. The seconds' digits flash.
6. Press the or
confirm and launch the countdown.
Press the key to stop/continue the countdown. When the
countdown is paused, press the
RADIO
Setting a radio frequency and storing a channel
The RP200SP radio displays 6 FM groups (FM1 to FM6) and each
group has 5 memory spaces (S1 to S5) available to store up to 30
radio frequencies.
1. Press the [RADIO] key to turn on the radio or the radio wake-up
function.
2. Press [SET] to go from the FM1 to the FM6 radio group.
3. Press the or
4. To store a frequency into one of the 5 spaces available (S1 to
S5), select a frequency and press and hold for 2 seconds the
space key (S1 to S5) you wish to store it in. Once a frequency is
stored, simply press the corresponding space key to tune in to
that frequency.
Searching radio frequencies automatically
This function allows you to scan all the radio frequencies within the
reception range of your unit and saves them into the radio memory
spaces. The first frequency will be saved in the S1 space of FM1,
the second frequency in S2, FM1, and the last one in S5, FM6.
Please note that the RP200SP can save up to 30 radio frequencies.
keys to set the hour. Press [SET] to confirm.
and
keys to adjust the seconds. Press [SET] to
key if you wish to reset it.
key to change the radio frequency.
keys to adjust the