Listen To Music From Bluetooth Device - Vieta Home VH-IS250BK Manuel Utilisateur

Tip:
- If there's a connection exist, press and hold
/Pair button on remote control or BLUETOOTH
button on front panel of unit for seconds will re-
activate the pairing mode, the connection will be
interrupted.
- If there's no other Bluetooth device pair with
this player in two minutes, the player will recovery
previous connection.
- The player will also be disconnected when your
device is moved beyond the operational range.
- If you want to reconnect your device to this player,
place it within the operational range.
- If the device is moved beyond the operational
range, when it is brought back, please check if the
device is still connected with the player.
- If they are connected, the LED indicator lights off
every two seconds.
- If the connection is lost, the LED indicator is always
on, follow the instruction above to pair your device to
the player again.
Pair with Bluetooth-enabled Device Using
One Touch (NFC)
Using an NFC compatible bluetooth device, you can
establish a bluetooth connection by just touching the
unit with it.
- Make sure bluetooth and NFC function is enabled
on your device.
1. Turn on the NFC function on your device.
- Make sure your device is in the wake-up mode.
16
All manuals and user guides at all-guides.com
2. Turn on the unit and switch to bluetooth source.
3. Touch the NFC sensing area with your device, the
unit will pair and connect with your device.
4. Touch this area again, the unit will disconnect the
bluetooth connection.
Tips:
Some NFC-enabled mobile devices cannot pair
directly with the unit via NFC, please try either one of
the solutions below:
• Please download the Apps "Tap-and- Pair" from
Google Play Store(https:// play. google. com) and
install.
• Pair with the unit manually first, then touch again on
the NFC sensing area.
Listen to music from Bluetooth device
• If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP), you can
listen to the music stored on the device through the
player.
• If the device also supports Audio Video Remote
Control Profile (AVRCP) profile, you can use the
player's remote control to play music stored on the
device.
1. Pair your device with the player.
2. Start play music via your device (if it support
A2DP).
3. Use supplied remote control to control play(if it
support AVRCP).
- To pause/resume play, press the
remote control or BLUETOOTH button on front panel
of unit.
- To skip to a track, press the
Play with an External Audio Device
There is one AUX socket at the rear of unit. Analogue
audio sound signals from other sources can be
connected to the unit through these socket.
1. In the ON mode, press AUX button on main unit
or FUNCTION on remote control to select AUX IN
function.
2. Press the +/- buttons to adjuct the volume to your
desired level.
3. In AUX IN mode, operate your audio device
directly for playback features.
/Pair button on
/ buttons.
Lightning Dock Charger and Player