Power On/Off - iDance BLUE TANK Manuel De L'utilisateur

PANEL DESCRIPTION
9. SEEK –
Pressing to go to the previous track. Press and hold to scan backward within tracks.
10. BT SYNC (PLAY/PAUSE)
Pressing this button will alternate between PLAY mode and PAUSE mode. Short press 1
second to turn on Bluetooth and connect to the old paired device, or will search for new
Bluetooth activated device for pairing in BT mode. Press and hold for 2 seconds to enter
"Discovering Mode", new device can be connected to Blue Tank. (Search for "DJ device 03"
on your device)
11. SEEK +
Press to go to the next track. Press and hold to scan forward within tracks.
12. Microphone XLR/TRS COMBO Jack with Gain and Echo control
This jack can either take a 6.5mm balanced TRS or an XLR balanced Plug.
13. SD Card slot
Insert a SD card into this slot
14. USB Port
Connect a USB memory stick and also you can connect your USB charging device (e.g. smart
phone, iPod/iPhone/iPad) to this port for charging (Note: for charging you must be in USB
mode). This port is not suited to Portable hard drives unless the hard drive has its own power
source.
15. MP3/FM TUNER GAIN
This knob controls the level of the USB/SD and FM Tuner.
16. AUX IN
This stereo RCA input and 3.5mm (Stereo) mini jack can be used to connect a CD, MP3, or
other audio source. ( You can not use both simultaneously. Doing so may cause damage to
the input devices)
17. AUX IN GAIN
This knob controls the level of the aux-in input.
All manuals and user guides at all-guides.com
18.
19.
20.
E5
POWER CONNECTOR
Insert the included power cord here to
charge the unit. Note that the Blue Tank
can run off the power adaptor while it
simultaneously charges the battery.

POWER ON/OFF

Turn the Blue Tank ON or OFF.
LINK OUTPUT
This XLR TRS COMBO Jack is a stereo line
level output that can be connected to the
input of another amplifier or the stereo
Aux input of another Blue Tank