Moza Mini-P Mode D'emploi page 6

Balancing
a. Loosen the tilt knob, and adjust the tilt arm back and forth until the
lens is horizontally forward, then lock the knob.
b. Rotate the camera until the lens is facing up, loosen the L-Bracket
quick release plate lock knob, and adjust the L-Bracket quick
release plate back and forth until the lens is straight up (leveled),
then lock the knob.
c. Loosen the roll knob, adjust the roll arm left and right until the roll
arm remains horizontal, then lock the knob; The camera or phone
should be leveled and can be positioned in any direction (up or
down) and it stays there.
d. Hold the stabilizer horizontally and make the pan arm parallel to
the ground, then loosen the pan knob, adjust the pan arm left
and right until the pan arm remains horizontal, and then lock the
knob. Your camera or phone should be leveled and can be
move to any direction (tilt, pan, roll) and stays on that position
without hands holding it.
Note: When adjusting the balance of an axis, please unlock the
motor lock of the axis first, otherwise it cannot be adjusted accurately; if
the balance is not adjusted accurately, it will cause the abnormal motor
work, motor overheat, unstable video, unavailable of certain functions,
and also shorten battery life, please make sure it is completely balanced
before turning on the gimbal.
Connecting camera or mobile phone
a. After installing the camera to the gimbal, you need to use the
camera control cable to connect camera with gimbal, and then
you can control the gimbal through the MOZA Master App
b. After installing the mobile phone to the gimbal, please open the
MOZA Genie App to connect the gimbal, then you can control
the phone to take photos or videos through te gimbal.
Note: For camera functions and features, please use Moza
Master App. For Phone controls, please use Moza Genie App.
a
c
5
b
d