NCREDIBLE AX1 Guide D'utilisation page 3

PAIRING WITH A SECOND DEVICE
Lets say you're using your phone and your laptop and don't want
to use the speaker for sound. When you pair both those devices
to your Ncredible AX1, you experience the following situation: If
a call comes in on your phone while you're watching a movie on
your laptop, the Ncredible AX1 Bluetooth connection will pause
the movie and connect to the phone call automatically.
1. Keep your first paired device on when you pair your
second device. Make sure your second device has
Bluetooth turned ON.
2. Turn off your headset then hold the POWER button for
6 seconds to go into pairing mode again and pair your
second device.
3. After your second device is successfully paired and
connected, the Bluetooth status on your first device will
automatically disconnect.
4. Go back to your first device and select "Ncredible AX1" from
the Bluetooth device list.
4
TROUBLESHOOTING PAIRING A SECOND DEVICE
If going back to the first device isn't working after pairing the
second device, you may need to adjust your Bluetooth settings
for the first device.
1. Open Bluetooth and make sure it is turned ON.
2. Select "Ncredible AX1".
3. FOR ANDROID USERS, make sure the Call Audio
and Media Audio buttons are ON.
5