Korg XE20 Guide De Prise En Main page 13

„ Playing audio from a computer connected to
the USB TO HOST port
1.
Turn the volume all the way down on both the XE20 and
your computer.
2.
Connect the computer to the USB TO HOST port on the
rear panel using a USB cable.
3.
Play back sound on the computer while slowly turning
up the volume. As you raise the volume on the XE20, you
should be able to hear the sound coming through the
speakers.
4.
To adjust the volume balance, raise the volume on your
computer while playing the keyboard of the XE20, along
with the sound played back from the computer.
When connecting to your computer, you may hear a loud
noise depending on the settings, so adjust the volume on your
computer.
Connecting to audio equipment
13