Security Plus GC-910-5 Directives D'installation page 2

MODEL GC-500-5
PISTOL-AMMO CABINET ASSEMBLY
IMPORTANT: Install the shelf before mounting the cabinet to a wall.
Install shelf with (4) 10-32 nuts and bolts. (See figure 4)
Place foam pad in bottom of cabinet.
Insert the plastic plugs in the cabinet's top mounting holes.
INSTALLATION OF GC-500-5 PISTOL-AMMO CABINET ON TOP OF
SECURITY CABINET
NOTE: We recommend that security cabinet be installed as described above.
IMPORTANT: Install the shelf before mounting the cabinet to a wall.
Remove the top hole plugs from the cabinet by pushing out from the inside of the cabinet.
Place the GC-500-5 on top and assemble with (2) 1/4-20 nuts and bolts. Do not tighten
bolts. (See figure 5)
Drill (4) 3/16" pilot holes into the wall studs and secure the GC-500-5 cabinet to the wall
using (2) lag bolts and washers. (See figure 5)
Tighten the (2) bolts that connect the cabinets.
IMPORTANT
Keep keys away from children. Keep this record of your serial and key
numbers in a secure place separate from your security cabinet. If you lose your
keys you will need this information as a reference for obtaining new keys. To
order a replacement key set, follow the instructions on the attached form.
4
5
STACK-ON PRODUCTS COMPANY
P. O. BOX 489
WAUCONDA, IL 60084
2
12
4472-0707