Filter Replacement - SMARTZO M1 Manuel D'utilisation

Filter replacement

The replacement period of the HEPA filter is 1-3 months.
The replacement method is as follows:
1. Rotate the base anticlockwise.
2. Pull out the base.
Maintenance
Before cleaning and other maintenance, the air purifier must be
disconnected from the power supply.
To ensure the effect of purification, please wrap dust gently from the air
intake hole with a soft cloth frequently.
Notes
1. Ensure the air purifier is placed stable to avoid excessive vibration
or other issues. A softer substrate will also produce fewer
vibrations.
2. The power supply voltage of this machine is DC 5V, please be sure
to use the power input matched with this machine.
3. The air purifier should be more than 20 cm from walls and other
obstructions.
4. If the air purifier is loud or smells abnormal, or high temperature,
please stop using it immediately. Check and clean/replace the
filter before continuing using the air purifier.
5. Do not put a finger or other objects into the protective net, and
the air intake or outlet.
6. Keep hair or fabric away from the machine, so it does not block or
enters the air intake or outlet.
7. Do not use the air purifier in high temperature, damp and/or wet
areas.
8. WARNING: UV radiation is emitted from this product. Avoid eye
and skin exposure to unshielded products.
2