Exquisit WK 6301 isw Instructions page 20

DE
You can obtain information about
the water hardness within your
living area from the competent
water company.
- Decalcify the water at the latest
if the boiling process lasts for a
very long time or if rather heavy
calcareous deposits have formed
on the heating plate in the water
container.
• Pour the decalcifying liquid
into the water container. For
this you can mix household
vinegar with water in a ratio of
1:1 or use a standard
decalcifying agent. Adhere to
the manufacturer's
specifications for use of a
decalcifying agent.
• Boil the decalcifying liquid in
the electric kettle.
• Let the liquid work for about
half an hour after boiling.
15 Technical information
Electrical connection
Voltage - frequency
Capacity
Power
EAN no.
CE Marking
At the time of its introduction on the market the product fulfills the
requirements, which were specified in the directive for the standardization
of the laws of the Member States concerning the electromagnetic
compatibility (2014/30/EU) of electrical equipment within certain voltage
limits (2014/35/EU). This product is identified by the CE marking and
delivered with a declaration of conformity for inspection by the market
monitoring authority. *Subject to change without notice*
Seite | 20
• Boil the liquid a second time is
there are severe calcareous
deposits.
• Then pour the liquid out.
• Boil fresh tap water and dump
it after boiling.
• Now the kettle is decalcified
and you can use it again as
usual.
14.3 Storage
As soon as the mains plug is
inserted into a socket and the
water container is placed on the
base, the appliance uses minimal
power, even if you are not boiling
water. Pull the mains plug out of
the socket, to disconnect the
kettle fully from the power supply
when you are not using it.
230-240 V~
50 Hz
1,5L
2000-2200 W
4016572021127