Lindy LTS-50 Manuel page 6

Controls
The Multi-function touch button on either earphone provides a multitude of features all from a tap of the finger.
Voice Assistant Integration
▪
To activate the connected devices voice assistant, press and hold the multi-function button for 1-2 seconds.
Music Playback
▪
Play / Pause: To pause audio playback tap the multi-function button of either earphone once. To continue
playback, tap either earphone again.
▪
Skip to Previous Track: Tap the multi-function button of either earphone 3 times.
▪
Skip to Next Track: Tap the multi-function button of either earphone twice.
▪
Volume Up: Press and hold the multi-function button of the right earphone. This will increase the volume
increments until the volume is at 100%. The LTS-50 will beep to indicate full volume.
▪
Volume Down: Press and hold the multi-function button of the left earphone. This will decrease the volume
increments until the volume is at 0%. The LTS-50 will beep to indicate 0% volume.
Phone Call Use
▪
Answer / End a Phone Call: To answer a phone call, tap the multi-function button of either earphone once during
an incoming call, press again to end the call.
▪
Reject a Phone Call: Press and hold the multi-function button for 1-2 seconds to decline an incoming call.
How To Ensure Correct Fit
To ensure the optimum fit and noise quality, please select the most suitable memory foam or silicone earphone tip
for your ears. Once inside your ears, rotate the LTS-50 anti-clockwise to secure the earphones using the rubber
wing. Please rotate using the rubber sides of the earphones to ensure the multi-function touch button does not
initiate playback.
Troubleshooting
If you experience no playback from earphone, please follow the below steps:
▪
Remove both earphones from the charging case to Power on.
▪
Tap the multi-function button twice quickly on both earphones.
▪
This will pair the earphones together.
One earphone's LED indicator will flash white to indicate pairing has been successful. The earphones will then
▪
look to pair to your source device.
For more help, please contact our Tech Support team: technical@lindy.co.uk
5