Alcad PDK-61911 Mode D'emploi page 25

2 - W I R E D O O R E N T R Y S Y S T E M S
Modify factory defaults
Enter electronic directory
STEPS FOR ACCESSING THE INSTALLER MENU
With the main screen displayed on the screen, press the keys simultaneously. The panel will emit a confirmation sound and show the
'Enter code' screen.
ey in the MASTER code. Press the key with the blue light to confirm.
K
If this is the first time that the installer menu has been accessed, enter the code '12345' (Factory default MASTER code). Otherwise, key in
the MASTER code that you have configured.
When the correct code has been entered, the panel will emit a beep and display the various options of the installer menu.
If the code is incorrect, an error message will appear on the screen.
Note: The maximum time allowed between step 1 and step 2 is 30 seconds. Once this period has elaspsed, you must begin again
at step 1.
The different options are shown in the default language. In order to change the language: select " Configuration" (3.1). Next, select
"Default Language" (3.2). In the list of languages that is displayed, select the language you wish to use (3.3). Confirm that you want to
change the language (3.4).
To learn more about modifying factory defaults, see "Configuration of the entrance panel according to the installation" on page 27.
To find out how to generate the electronic directory, see "Electronic Directory" on page 35.