Important; Technical Specifications - Genie E-100 Mode D'emploi

INTRODUCTION
Congratulations on your purchase of the GENIE battery operated pencil sharpener. This is a
precision instrument designed specifically to provide reliability, durability, and outstanding
performance.
In order to ensure the scale continues to deliver peak performance, please read these operation
instructions carefully and thoroughly prior to initial usage.

IMPORTANT

1.
The manufacturer does not warrant this unit to be waterproof. Do not expose this product to
rain or moisture.
2.
Avoid contact with too much dirt and dust as well as impacts.
3.
Remove all packaging materials and check for damage. If any damage occurs to the
sharpener or it may not work properly, contact our service department. Please see our
warranty and service information at the end of this manual

TECHNICAL SPECIFICATIONS

Battery operation: 3V, 2 x 1.5V type AAA / LR03
Eraser Eraser Clip
INSTALL BATTERIES
1. The unit is powered by two 1.5V AAA / LR03 batteries (not included).
2. Slide the battery compartment cover in the direction of the arrow and lift it off.
3. Insert two 1.5V AAA / LR03 batteries into the battery compartment. Observe the correct
polarity, as indicated in the battery compartment.
4. Close the battery compartment with the cover, which must engage audibly.
CHANGE ERASER
Pull the eraser clamp from the tip of the unit.
1. Place a new eraser in the clamp.
Insert the eraser clamp into the tip of the unit.
IN USE
Press and hold the power button during erasing.
CLEANING AND CARE
Wipe the unit with a dry cloth.
Attention! Never use alcohol, acetone, benzene, aggressive cleaning agents, etc. to clean
the plastic parts. Do not use hard brushes or metallic objects.
All manuals and user guides at all-guides.com
GB OPERATING MANUAL
Battery compartment
On Off Switch
4
Battery compartment cover