Genie 3606 EDS Mode D'emploi page 6

(1)
(3)
(2)
OPERATION
ACTIVATING THE SCALE
1. Turn the scale on by pressing "TARE/ ON" key
2. The LCD screen will show all characters for a few seconds and then 0g or 0.0oz will be shown on
the display.
3. The scale turns off automatically after being idle for two minutes.
WEIGHING AN ITEM
1. Turn on the scale.
2. Place an item on the platform and the exact weight of item will be displayed.
SELECTING WEIGHT UNIT
When the scale is power on, press the "UNIT" key repeatedly to change weight unit according to
following sequence: g - oz
USING THE TARE MODE:
1. Turn the scale on.
2. "0g/0.0oz" will be shown on the display.
3. Place an item on the weighing platform and read the value accordingly.
4. Press the "TARE/ ON" again. The weight of this item will be eliminated and the reading will
change to "0g/0.0oz".
5. Place next item on the weighing platform and get the reading.
Note: The scale will display a negative reading when you remove all items. Press the "TARE/ ON" key
once and the negative reading will disappear.
OVERLOAD
When the loading capacity exceeds the maximum capacity (11 lb or 5kgs) of the Digital Scale, "EEEE"
will be displayed on the LCD screen. Remove the item(s) from the scale platform to avoid damage to
the scale.
POWER OFF
1. The scale can be power off manually by pressing the "TARE/ ON" key for 2 seconds
2. The scale turns off automatically after being idle for two minutes.
All manuals and user guides at all-guides.com
(4)
6
(5)