Publicité
Les langues disponibles
Les langues disponibles
Fitting Instructions
Type of lamp:
EN
84770010
Led Beacon - Three-point mounting
84770012
Led Beacon - Magnetic Base
84770011
Led Beacon - Fastening on tube
with Flexible Base
IMPORTANT
Read carefully before use
Keep for later reference
The latest version of the Operating/
Fitting instructions is also available
in our online catalogue:
herthundbuss.com/online catalogue
www.herthundbuss.com
84770010-012
Operating voltage: 10-30V DC
Type of LEDs: High Power STD
Operating temperature: -40 °C TO + 65 °C
Power consumption: From 26W to 42W (de-
pends on the flash freq.)
Reverse polarity protection: Yes
Lens material: Polycarbonate
Flashing frequency: 10 flashing patterns
Type Approval: Special Warning Lamp accor-
ding to ECE Reg. 65 Category T (for single
flash pattern-124fpm)
ECE Approval numbers:
TA1-E9-00 1898
TB1-E9-00 1902
TR1-E9-00 1899
Fitting Instructions
84770010
Top Mount
Drill the 3 holes on the roof and use the 3
tapping screws to install the item in diam.
103mm
Wires Designation:
Red
Positive (+VDC)
Brown
Change the pattern-Synchronize
LED beacons
White
Ground
Changing Flash Pattern:
Applying +VDC to the brown wire for 1 se-
conds and disconnecting the two wires will
change the pattern. The flash pattern will be
from flash pattern mode 1 to mode 10 in fre-
quency.
Synchronization Instructions:
For all beacons to be synchronized they must
be set at the same pattern and when powe-
red off, all the brown wires of the beacons
being linked together. When powered on all
the beacons will be synchronized.
4
5
84770010-012
84770012
Cigarette plug with on-off and change
pattern switch
84770011
Fastening on tube with flexible base:
With flash pattern change switch on a base
EN
Publicité
