Publicité
Front Panel
1. POWER Switch:
This switches the AC power to the mixer ON or OFF.
Note: Be sure to switch on the power to your mixer before switching on the amplification system.
2. CUE Level Control:
This control varies the volume in your headphones, the volume of the signal heard through the
headphones.
3. GAIN Controls:
Correct setting of the controls for input GAIN for every channel is crucial for getting a good, strong
signal without noise or distortion.
4. Channel Level Control:
The channel fader adjusts the overall volume of the channel. The faders of the stereo channels
control both left and right signal at same time.
5. PHONES:
This is a 1/4" stereo jack socket mounted on the bottom side of the mixer for you to attach your
headphones.
6. TALK OVER Switch:
With this switch engaged the main music program will be attenuated by 12dB when the mic is
active.
7. Microphone LEVEL Control:
Controls the overall level of the DJ Microphone being mixed onto the Master outputs.
8. Input Selector:
Each music input channels has two input options. This switch lets you select which of the inputs
plugged into the channel you wish to use. All input channels are dual with Channel
PHONO/LINE1, Channel PHONO/LINE2 (CD is a line level source).
9. MASTER OUT Display:
The output level of the mixer is shown in the MASTER OUT display.
10. CUE Selector:
This control selects the input signal on the respective channel and routes it to the headphones
output.
11. Replaceable Crossfader:
This dipless horizontal slider provides clean segues between the sources on channel 1 and
channel 2. This allows for effortless crossfading between the 1 and 2 side of the crossfader.
12. DJ Microphone Input:
An unbalanced 1/4" jack socket is mounted on the bottom face of the mixer for connecting your
microphone.
All manuals and user guides at all-guides.com
Publicité
